The Main Setup - Burmester 077 Owner's Manual

The MAIN SETUP offers the adjustment of functions like BALANCE, FADER, INITIAL VOLUME, VOLUME SCALE,
AMPLIFICATION and CONFIGURATION OF INPUT 6 for the MAIN level.
The following chart provides an overview of all menu items, which can be adjusted in the MAIN SETUP. The factory
settings (defaults) are listed in brackets. Subsequent to the chart you will find a detailed description of the menu
items.
MENU ITEM
Balance
Fader
Initial volume
Volume scale
Amplification
Configuration of INPUT 6
The MAIN SETUP MENU is activated by pulling up the switch key (15) on the front panel or by pressing the MENU
button on your remote control. The display indicates the activation by showing MAIN SETUP, followed by the first
menu item. PLEASE NOTE: In order to activate the MAIN SETUP, the device has to be in MAIN level (REC/MAIN-
LED (5) is not illuminated).
To exit and automatically save the menu push down the switch key (15) or press the MENU button on your remote
control.
Balance Some spatial arrangements require a shift of the volume ratio between the two reproducing
channels. The volume shift is realized by reducing one of the two stereo channels. It is
possible to alleviate one channel of the preamp 077 up to 9 dB (factor 2.8) in steps of 1 dB,
and for specific situations to switch it off completely.
Select menu item M-BAL with the left rotary switch or the navigation buttons
remote control.
With the right rotary switch or the navigation buttons
select the desired value:
<C>
-09R to -01R the right channel of the MAIN level will be reproduced with reduced volume
OFF R
-09L to -01L the left channel of the MAIN level will be reproduced with reduced volume
OFF L
The balance setting has no effect on the SURROUND input.

THE MAIN SETUP

DESCRIPTION
Sets volume left/right ratio
Selects volume level of RECORD-speakers, only
available during 4 channel mode
Selects volume after switching on the device
Indication in dB or Burmester steps
Total amplification LOW or HIGH
INPUT 6 as regular input or surround input
both stereo channels of the MAIN level will be reproduced at the same
volume level
the right channel of the MAIN level is muted
the left channel of the MAIN level is muted
DISPLAY
M-SCALE
¡
22
VALUE
OFF R, -09R to -01R
M-BAL (<C>)
-01L to -09L, OFF L
-10 to –01
FADER (<C>)
01 to 10
M-VOL (01) to 20, LAST
(BUR) / dB
M-OUT (LOW) / HIGH
M-IN6 INP / (SURR)
¡
on your remote control you may
on your