Setup Menu - Burmester 099 Owner's Manual

The 099 preamplifier offers a whole range of special settings and functionalities that enable you to customize the unit
according to your individual requirements. Use the SETUP MENU to navigate and choose special settings.
Activate the menu by pressing the MENU button on the remote. When the menu function has been chosen the
Phase LED (2) and the Audio LED (3) start blinking to indicate that the preamp is in menu mode.
To navigate through the menu items use the Input selector knob (5) or the ► ◄ buttons on the remote. To change
menu options use the Volume control knob (7) or the ▲ ▼ buttons on the remote.
While in menu mode the Input selection LEDs (1) highlight the menu items and the Volume level LEDs (4) the
different options for the menu items.
While you are navigating the menu and customize your settings the music from the selected source keeps playing.
Thus you can hear the immediate sound effect of the changes you've made.
Please note: In our following instructions we assume that you've already activated the menu mode with the remote
and that both LEDs (2) and (3) are blinking.
Here is an overview over all menu items. The columns Input selection LED (1) and Volume level LED (4) explain
how the 099 visualizes the different menu options. The following pages explain each item in detail.
MENU ITEMS OPTIONS
Separate input level adjustment
Input level
for each input
Page 17
Sets the volume level at which
Startup volume
the preamp starts up
Page17
Deactivates the STATION +/–
Input selection by
buttons and the numerical
remote control
buttons on the remote
Page17
Enables or disables the control
Turn controls on or
knobs on the front panel of the
off
099
Page18
Output gain
Changes the overall gain of the
adjustment
099 between High und Low
Page18
Adjustable volume or fixed
Volume control
output level
Page19
Factory default
Restoring the factory settings
settings
(Default settings as shipped)
Page19

SETUP MENU

Input selection LED (1)
The LED of the selected input
is illuminated
All LEDs illuminate
The TUNER LED goes dark, all
other LEDs illuminate
The TAPE LED goes dark, all
other LEDs illuminate
The AUX LED goes dark, all
other LEDs illuminate
The CD LED goes dark, all
other LEDs illuminate
The DVD LED goes dark, all
other LEDs illuminate
16
Volume level LED (4)
LEDs on the front panel
indicate level boost or
reduction
The bottom three LEDs
indicate the startup volume
level
LED on = activated
LED off = deactivated
LED on = activated
LED off = deactivated
LED off = low (+0dB)
LED on = high (+6dB)
LED off = variable
LED on = fixed level
LED blinks when the default
settings are restored