Table of Contents
Advertisement
O P E R A T I O N
M A N U A L
Input selection with the remote control
If you want to change the inputs of the preamp with the keys STATION +/- of your
remote control, you need to set this item to YES. If this item is set to NO, inputs can
only be changed with the input selector (1) on the front panel of the unit and the
direct input buttons on the remote control, for example the CD button.
Select menu item RC INPUT with the left rotary switch or the navigation buttons
► ◄ on your remote control.
With the right rotary switch or the navigation buttons ▲ ▼ on your remote control
you may select one of the following.
NO
Inputs cannot be changed with the STATION keys of the remote control.
YES
Inputs can be changed with the STATION keys of the remote control.
Factory Settings
In order to reset all adjustments including display brightness back to factory
settings you have to select the menu item DEFAULTS. Now confirm with the right
rotary switch or by pressing the OK button on your remote control. This provides
a child proof lock option.
The display indicates BUILDING followed by PRESET, which confirms that factory
settings have been loaded successfully. Afterwards the menu item INPUT LEVEL
will be shown in the display.
By pushing down the switch key (13) or shortly pressing MENU on your remote
control you leave the menu and factory settings will be activated.
2 8 | 4 6
The Main Setup
The MAIN SETUP offers the adjustment of functions like BALANCE and
INITIAL VOLUME.
The following chart provides an overview of all menu items, which can be adjusted
in the MAIN SETUP. The factory settings (defaults) are listed in brackets.
Subsequent to the chart you will find a detailed description of the menu items.
MENU ITEM
DESCRIPTION
Balance
Sets volume left/right ratio
Initial volume
Selects volume after
switching on the device
The MAIN SETUP MENU is activated by pulling up the switch key (13) on the front
panel or by pressing the MENU button on your remote control. The display
indicates the activation by showing MAIN SETUP, followed by the first menu item.
To exit and automatically save the menu pull up the switch key (13) or press the
MENU button on your remote control.
0 8 8
P R E A M P
DISPLAY
VALUE
BAL
OFF R, -
09
R to -
01
R
(<C>) -
01
L to -
09
L,
OFF L
VOL
(
01
) to
20
, LAST
2 9 | 4 6
Advertisement
Table of Contents
