Sending A Batch Transmission - Konica Minolta bizhub C20X User Manual

6
Press the Start key to begin scanning, and then the machine enters trans-
mission standby mode.
appears in the screen when the machine is in standby mode.
If you want to cancel a timer transmission, select
RESERV.
on page 57.

Sending a Batch Transmission

Multiple documents can be scanned and stored in the memory of this
machine to be sent together to a single destination at a specified time.
From the UTILITY menu, batch transmission settings (transmission
time) must have been registered with a speed dial number in advance.
For details, refer to "Using the Speed Dial Function" on page 45.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
For details, refer to "Adjusting the Image Quality" on page 42.
3
Select destinations for the batch transmission from the favorite list, or
specify their speed dial number.
For details on selecting destinations from the favorite list, refer to
"Using the Favorite List" on page 44.
For details on specifying destinations by their speed dial number, refer
to "Using the Speed Dial Function" on page 45.
4
Press the Start key to begin scanning, and then the machine enters trans-
mission standby mode.
appears in the screen when the machine is in standby mode.
To cancel a batch transmission, select CANCEL RESERV.. For details,
refer to "Cancelling a Queued Transmission" on page 57.
Sending a Batch Transmission
All manuals and user guides at all-guides.com
. For details, refer to "Cancelling a Queued Transmission"
CANCEL
51