Before Using - T&D RTR-5W User Manual

Before Using...

*When using an RTR-50 as a Repeater
Thank you for purchasing this product.
Please be careful about the procedures for Installation.
(For USB communication between your computer and an RTR-50)
The application and USB device driver must be installed for USB communication between
your computer and an RTR-50.
Before connecting an RTR-50, make sure to install the application and USB device
driver into your computer. If you connect an RTR-50 to the computer before
installing, the USB device driver may not be installed properly.
If you have connected an RTR-50 to your computer before installing the USB device
driver, make sure to click the [Cancel] button in the Wizard window when it pops up on the
computer display. Then disconnect the USB cable from the RTR-50.
For derails about the USB driver installation, see the [Repeater Registration] – [Installing
the USB Device Driver] (p.51).
9