When Using Optical Communication - T&D RTR-5W User Manual

■ When using Optical Communication

1.
Open [RTR-5W for Windows].
2.
Place the Remote Unit from which you wish to download data face down on top
of the specified RTR-5W (Location).
3.
From the Administration Tree, select the Location you will use for Optical
Communication.
4.
In the [Data] Menu, select [Download Data (Optical Communication].
Select the
Download Mode
5.
Click the [Specify] Button to specify the file saving location.
*If only one Remote Unit has been selected, the default file name will appear when this
window is opened.
6.
Make settings for [Specify the Downloading Mode].
7.
Click the [Download] Button to start downloading.
*If you wish to continue downloading from other units, repeat the process as in steps 2
to 7.
[Cancel Downloading] Button
Use this to stop a downloading session in progress.
Note that if a downloading session is stopped while in progress, the results will NOT be
saved to a file.
[Specify...]
Button
[Download]
Button
68