T&D RTR-5W User Manual page 115

4.
Assign a Data Storage Folder by clicking on the [Browse] button and selecting
the desired folder.
*Using "RTR-5W for Windows" with Windows Vista or Windows 7
Note that when using the Windows Vista or Windows 7 OS the "Virtual Store"
function will redirect files from the default folder into which the program was installed
to separate folders under [Program Files] for each user, as shown below: [C:\User\
(AccountName)\AppData\Local\VirtualStore\Program Files\(Application)].
(EX:
If login was carried out using the account name "myname" and "RTR-5W for
Windows" is the application being run, the saving location will appear in the application
window as: [C:\Program Files\RTR-5W for Windows\data] but due to the "Virtual
Store" function the actual saving location will be [C:\User\myname\AppData\Local\
VirtualStore\Program Files\RTR-5W for Windows\data].
If the login was carried out from [Run as Administrator], the file will be saved to the
folder as it appears in the application window.
5.
Click the [OK] Button to finish the setting process.
NOTE:
- Make sure that RTR-5W for Windows is open when a programmed Auto-Download is scheduled to occur.
- If another type of communication, such as a warning monitoring, occurs at the scheduled downloading time
and downloading is not possible, downloading will begin upon the ending of the other communication.
- Depending on radio wave conditions, data downloading may at times be impossible. Please check in the
downloading log for important data.
- If the recording mode is set for One Time and the logger becomes full, you may be downloading the same
data over and over again.
Assign a Data Storage Folder.
106