Returning The Network Settings To The Factory; Default Settings - T&D RTR-5W User Manual

Returning the Network Settings to the Factory

Default Settings

If you have forgotten the IP address or the password you can easily return the logger to the
default factory settings.
1.
Pull out the AC adaptor plug from the RTR-5W logger.
2.
Press in the [RESET] Button on the RTR-5W logger with a pointed object and
reconnect the AC adaptor.
3.
When the [Power] lamp on the face of the RTR-5W logger starts blinking, release
the [RESET] Button and the unit will have been returned to the factory default
settings.
35
[RESET] Button