Rtr-52Pt Sensor Settings - T&D RTR-5W User Manual

RTR-52Pt Sensor Settings

The types of sensors that can be used with RTR-52Pt are either Pt100 or Pt1000. Select
the type being used and make the necessary settings.
*The settings can be made only via optical communication.
NOTE:
Note that if a recording session is in progress, it will be stopped during the sending of the settings.
1.
Open [RTR-5W for Windows].
2.
From the Administration Tree, select the RTR-52Pt unit (only one at a time) for
which settings are to be made and then select [Settings] – [RTR-52Pt Settings].
Check one
3.
Place a check next to [Pt100] or [Pt1000] and click the [Send] Button to send the
settings and complete set-up.
[Get Sensor Type] Button
The sensor settings for the RTR-52Pt unit currently placed on top of the RTR-5W will be
gathered.
[Send]
Button
[Get Sensor Type]
Button
118