Rtr-5W Clock Settings; Automatic Setting Of The Clock - T&D RTR-5W User Manual

RTR-5W Clock Settings

If the clock settings for the RTR-5W are not set correctly, the clock in the RTR-5W Web
Viewer and the time of warnings will also be incorrect. Please make sure to set correctly
before beginning to use.

■ Automatic Setting of the Clock

Normally, when an RTR-5W is rebooted the clock settings will be initialized. However, by
making settings to enable the SNTP server it is possible to have the clock automatically
reset to the current time upon rebooting.
*The SNTP (NTP) server is a server that automatically adjusts the clock settings of a
terminal on a network.
1.
Open the [Network Settings Utility], click on the [Detailed Network Settings] tab,
and gather the settings for the RTR-5W that you wish to make settings for.
2.
Click the [Change Settings] Button and the window will appear where you can
make changes to the settings.
SMTP Settings
3.
Under [SNTP Settings], click "ON" to change the setting.
【How to find an NTP server】
-If you are connected to an intra company LAN, you may already have an NTP server for your
network. Please ask your network administrator for details.
-If you are connected to the Internet, some providers will have an NTP server open to the
public. Please ask your provider for details.
-If you wish to use an NTP server that is open to the general public on the Internet, it is
possible to make a search for "NTP server" using Yahoo or Google. Many universities or
scientific facilities will have an NTP server open to the public. Make sure to use the server
which is closet to your location.
Please also make sure to check whether connection is free and without limitation.
It should also be noted that depending on your Internet connection and your firewall settings,
the NTP packet may be prohibited from being accepted into your system.
36