Table of Contents
Advertisement
Remote Unit / Repeater Installation Procedures
1.
Connect the provided AC adaptor to the Base Unit (RTR-5W), and connect the
LAN cable to the PC
For more details see "p.16 Getting the RTR-5W Ready to Use".
2.
Register Groups and Remote Units
Register all Remote Units to be placed.
For more details see "p.44 Remote Registration".
3.
Register Repeater Names and Relay Routes.
For more details see "p.51 Repeater Registration".
NOTE:
There is no need to register a Repeater if there are no Repeaters between a Remote Unit and the
RTR-50 Base Unit. However, if communication cannot be successfully carried out due to poor radio wave
reception, please place Repeater(s) between the Remote Unit and the Base Unit.
41
Advertisement
Table of Contents
