Wireless Communication Test - T&D RTR-5W User Manual

■ Wireless Communication Test

If no Repeaters exist, gather the current data readings from each Remote Unit and check
to make sure that wireless communication is possible between the Remote Units and the
RTR-5W Station.
1.
Place a Remote Unit in the actual place from which you wish to measure and
record data.
- The wireless communication range, if unobstructed and direct, is about 100 meters
"330 ft".
2.
Select the placed Remote Unit from the Administration Tree, and in the [Data]
Menu, select [Gather Current Data].
*By right clicking on the Remote Unit icon, a popup menu will appear where you can
select [Gather Current Data] to display the [Gathering Current Data] window.
Selected Remote
Unit is displayed
3.
Click the [Gather] Button to start communication with the Remote Unit and the
current data readings will be displayed.
If the current readings are not displayed, move the Remote Unit to a different Location
and try gathering the current data again.
[Gather]
Button
50