Outline Of Use; Basic Operation - T&D RTR-5W User Manual

Outline of Use

■ Basic Operation

Getting Ready
1. Prepare the Data Loggers you wish to use as Remote Units
Get the units ready for measuring by connecting the proper sensors and installing the proper
batteries.
2. Getting the RTR-5W Ready to Use
Get the unit ready for communication by connecting the network cable and AC adaptor.
*To use as a Repeater, it is first necessary to prepare the RTR-50 as a Repeater.
3. Checking your Operating Environment
You also need to check your computer and network setup and be sure to prepare any
necessary devices like routers to enable connection to your access point
4. Connecting to a Network
Connect the RTR-5W to the desired network.
See p.20-21 for connection examples of how to connect directly to your computer or use a
router.
*Even if you are planning to use a wireless LAN, it is necessary to make the initial settings via
a wired connection.
5. Install RTR-5W for Windows
To enable set up, install the supplied software RTR-5W for Windows into your computer.
By installing RTR-5W, all of the following applications will be installed: [RTR-5W for Windows]
for setting up Remote Units, making recording settings and other operational settings, [Network
Settings Utility] for making network settings, and [Temperature / Humidity Graph], [Multi-Scale
Graph], [Event Viewer] for viewing various types of recorded data.
10