Table of Contents
Advertisement
3.
The Communication Test results will appear.
Communication Successful The number of vertical lines shows the Radio Wave
Strength. (Min: 1 / Max: 5)
If testing is of a Repeater, the Radio Wave Strength shown will be for between
that Unit and the Unit with one number before it. (If the Repeater Number is 1
then the Strength shown will be for communication with the Base Unit).
Communication Failure Appears in front of the Remote or Repeater Name for
which a communication failure has occurred.
Appears in front of the Remote or Repeater Name for which the test has not
been selected in the test mode (communication does not occur).
*If a communication failure has occurred, check the Repeater / Remote Unit location
and the remaining battery life.
63
Advertisement
Table of Contents
