3.
Enter a name for the Remote Unit and click the [Register] Button to finish the
registration.
- If you are using an RVR-52A logger, click the [Voltage:instantaneous value] Button
and select the desired measuring mode.
Remote Units that have
already been registered
*If you wish to register other Remote Units, repeat the process as in steps 1 to 3.
■ Sending Registration Info to an RTR-5W
1.
Select a Location from the Administration Tree, and in the [Settings] Menu, select
[Send Group / Remote Info].
2.
Click the [Send] Button to send the registration info to the RTR-5W and complete
the settings.
*Make sure to carry out this operation each time changes are made to settings.
49
Enter the Remote
Unit Name
[Voltage:instantaneous value]
[Send]
Button
Button
[Register]
Button