Communicating With The Data Logger; Communicating With A Data Logger Via Optical Communication; Communicating With A Data Logger Via Wireless Communication - T&D RTR-5W User Manual

Communicating with the Data Logger

It is possible to communicate between an RTR-5W base station and Data Loggers
RTR-51/52/52Pt/53, RVR-52A by two methods: "Wireless Communication" and "Optical
Communication".

■ Communicating with a Data Logger via Optical Communication

Optical communication can be carried out by placing an RTR-51/52/52Pt/53, RVR-52A
Data Logger face down on the RTR-5W so that the optical communication areas meet.
*To make measuring mode changes in an RVR-52A, use via optical communication when
registering a Remote Unit.

■ Communicating with a Data Logger via Wireless Communication

Communication is carried out with the RTR-51/52/52Pt/53, RVR-52A Data Loggers via
special short wave wireless communication.
In order to carry out Wireless Communication, use the supplied software RTR-5W for
Windows to register the Data Loggers as Remote Units of the RTR-5W Base Station.
*The wireless communication range, if unobstructed and direct, is about 100 meters.
17
Optical Communication Area
Place a Data Logger face
down on the RTR-5W