Scale / Unit Conversion: From [Tools] Menu - T&D RTR-5W User Manual

■ Scale / Unit Conversion: From [Tools] Menu

It is possible to make settings for the conversion of units and scales for each channel of
downloaded data.
1.
Select to use 2 voltage points to convert the scale, [Designate by 2 points] or to
use the conversion equation of [Designate by y=Ax+B].
[Designate by 2 points]
2.
Make settings for the conversion equation and unit.
3.
Click the [OK] Button to finish the setting process.
Conversion Info
The currently set conversion equation and the character array of the current unit will be
displayed.
By stands for the value after conversion and x is the voltage input directly from the sensor.
91
[Designate by y=Ax+B]
Conversion Info
[OK]
Button