Table of Contents
Advertisement
7.
In the [Settings] Menu, click on [Start / Stop Warning].
*By right clicking on the selected Remote Unit icon(s), a popup menu will appear where
you can select [Start / Stop Warning] to display the same window.
[Warning Monitoring]
[notification address]
[A sender address]
[Notification Settings]
8.
Make the desired settings.
Warning Monitoring
If you wish to carry out the monitoring of warnings, place a check next to the [Warning ON]
and make monitoring interval settings.
*Enter an amount of time between 10 minutes and 1440 minutes. If this interval is short,
battery life will be depleted quickly.
Notification Address
Set the recipient address(es) for the Warning Mail.
*If the check is removed, the warning mail will not be sent to that address.
Sender Address
This will be only used in the mail display to show where a warning report mail has been sent
from.
It should be noted that if you assign an imaginary address, in some cases the SMTP server
will judge the mail to be SPAM or junk mail and not allow it to be sent. Please use your own
mail address.
112
Advertisement
Table of Contents
