Installing The Software; Before Installing The Software - T&D RTR-500NW User Manual

Network base station

Hide thumbs Also See for RTR-500NW:

Table of Contents

Installing the Software

Is Windows working properly?

If Windows is not operating properly, the software may not be installed

correctly or it may not operate properly.

Make sure to check that the OS you are running and

"RTR-500W for Windows"are compatible.

Microsoft Windows 8 32 / 64 bit

Microsoft Windows 7 32 / 64 bit

Microsoft Windows Vista 32 bit (SP1 or later)

Microsoft Windows XP 32 bit (SP3 or later)

For details about the necessary operating environment, see page 41.

Quit all other applications

If you are running other applications, make sure to quit them before

installation. If you have any permanently active software, such as a virus

check or scan program in your computer, make sure to also quit it.

To install "RTR-500W for Windows", it is necessary to have Administrator

rights (Computer Administrator) for the computer in which you wish to

install it.

RTR-500W_Introductory_Manual.indd

Make sure to install the software before connecting

the Unit to a PC with the USB cable.

If you have connected a Unit to your computer before installing the

USB device driver, make sure to click the [Cancel] button in the

Wizard window when it pops up on the computer display. Then

disconnect the USB cable from the Unit.

Getting Ready

2013/04/19

15:55:04

Table of Contents

Rtr-500aw