Table of Contents
Advertisement
Subject Name (Title)
Enter the title of the e-mail. Up to 16 characters can be entered.
Sender Address
Enter the address from which a mail containing the downloaded data will be sent.
NOTE:
Please enter a valid e-mail address via which the sending and receiving of e-mail can be performed. It should
be noted that if you assign an invalid or an imaginary Sender Address, the mail may not reach the intended
party.
Recipient Address
Enter the address to which mail containing the downloaded data will be sent.
Please set an e-mail address to which it is possible to send a mail from the RTR-5W
environment.
4.
Make " Remote Settings " .
Select a Remote Unit or Units for which you wish to make settings from the list and
check "Send mail containing data from selected Remote".
Select either "Send at Fixed Time Every Day" or "Send at Fixed Interval" and then set
the number of hours for downloading data in the "Download data for this number of
hours".
5.
After the settings have been completed, click " View these Settings " .
If you wish to make settings for other Remote Units, repeat the process as in steps 4
and 5.
6.
Click the [OK] Button to send the settings to the RTR-5W and complete the
settings.
7.
Click the [Transmission Test] Button to test if a mail can be sent.
[Gather Schedule] Button
This will retrieve download schedule info from the RTR-5W and display the time of the next
scheduled download.
NOTE:
New settings made here will not be transmitted to the RTR-5W and will not become activated until the [OK]
Button has been clicked.
117
Advertisement
Table of Contents
