Output Terminals: F2.00-F2.19 - Powtran PI9000 series User Manual

"Superscript
Note:
keyboard have such function.

5-2-4.Output terminals: F2.00-F2.19

Code Parameter name
SPB terminal output mode
F2.00
selection
SPB terminal is a programmable complex terminals, it can be used as an output terminal
of high-speed pulse, also an switching output terminal of collector open circuit.
As a high-speed pulse output, the highest frequency of output pulse is 100kHz, please
see the instructions of F2.06 for high-speed pulse output function.
Switching quantity
output function selection
F2.01
(collector Open circuit
output terminals)
Relay 1 output function
F2.02
selection
(TA1.TB1.TC1)
F2.03
Undefined
SPA output function
F2.04
selection (collector Open
circuit output terminals)
Relay 2 output function
F2.05
selection
(TA2.TB2.TC2)
The above five function codes are used to select five digital output functions.
Multifunction output terminal function is described as follows:
Set
value
0 No output
1 Inverter in service
bits
Stop keep
Stop order zero clear
Stop over zero clear
Hundre
d bits
Thousa
nd bits
3
"means software version of C3.00 and above with MCU
High-speed pulse output
Switching quantity
output
0 to 40
0 to 40
0 to 40
0 to 40
Function
Chapter 5 Function parameter
keep
Reserve
Reserve
Setting range
No output action
The inverter is in operation with output
frequency (zero), and outputs ON signal.
111
0
1
2
Factory
setting
0
0
1
0
2
1
1
Description
Change
Limit
☆
☆
☆
☆
☆