Powtran PI9000 series User Manual page 66

Chapter 5 Function parameter
Parameter
No. Code
name
Fault protection
274.
F8.18 action selection
2
Fault protection
275.
F8.19 action selection
3
Setting range
abnormal( Err.16 )(same as
units digit)
Units digit: encoder/PG
card abnormal (Err.20)
0: Free stop
1： Switch to
V/F
and then
stop at the selected mode
V/F
2：Switch to and
continue to run
Tens digit: function code
read and write abnormal
(Err.21)
0: Free stop
1: Stop at the selected
mode
Hundreds digit: Reserved
Thousands digit: Motor
overheating (Err.25) ( same
as F8.17 units digit)
Ten thousands digit:
Running time
arrival( Err.26 )( same as
F8.17 units digit)
Units digit:User-defined
fault 1(Err.27) ( same as
F8.17 units digit)
Tens digit: User-defined
fault 2(Err.28) ( same as
F8.17 units digit)
Hundreds digit: Power-on
time arrival (Err.29) ( same
as F8.17 units digit)
Thousands digit: Load
drop (Err.30)
0: Free stop
1: Deceleration parking
2: Deceleration up to 7%
60
Chan
Factory Reference
ge
setting page
☆
00000
☆
00000
144
144