Powtran PI9000 series User Manual page 113

Minimum input value
F1.20
for AI curve 3
Minimum input
F1.21
setting for AI curve 3
Maximum input for AI
F1.22
curve 3
Maximum input
F1.23
setting for AI curve 3
For the function and use of curve 3, please refer to the description of curve 1.
F1.24
AI curve selection
Units digit, tens digit and hundreds digit of the function code are used to respectively
select the corresponding set curves of analog input AI1, AI2, Panel potentiometer
3 analog input can respectively select any one of 3 curves.
Curve 1, curve 2 and curve 3 are 2-point curve, they are set in F1 function code.
Setting selection for
F1.25
AI less than minimum
input
0.00V to F1.22
-100.00% to 100.0%
F1.20 to 10.00V
-100.0% to 100.0%
Units
AI1 curve selection
digit
Curve 1 (2 points, see
F1.12 to F1.15)
Curve 2 (2 points, see
F1.16 to F1.19)
Curve 3 (2 points, see
F1.20 to F1.23)
AI2 curve selection
Tens
(1 to 3, as above)
digit
Panel
potentiometer
Hundreds
curve selection (1
digit
to 3, as above)
Setting
Units
for AI1 less than
digit
minimum input
The corresponding
minimum input setting
0.0%
Setting selection
for AI2 less than
Tens digit
minimum input(0
to 1, ditto)
Setting selection
for panel
Hundreds
potentiometer less
digit
than minimum
input(0 to 1, ditto)
107
Chapter 5 Function parameter
0.00V
0.0%
10.00V
100.0%
1
2
0x321
3
selection
0
1
0x00
☆
☆
☆
☆
☆
☆