Agilent Technologies 33250A User Manual page 207

DATA:DELete <arb name>
Delete the specified arbitrary waveform from memory. You can delete
the waveform in volatile memory or any of the four user-defined
waveforms in non-volatile memory.
• You cannot delete the arbitrary waveform that is currently being
output. If you attempt to delete this waveform, a "Not able to delete
the currently selected active arb waveform" error is generated.
• You cannot delete any of the five built-in arbitrary waveforms. If you
attempt to delete one of these waveforms, a "Not able to delete a built-
in arb waveform" error is generated.
• Use the DATA:DEL:ALL command to delete the waveform in volatile
memory and all user-defined non-volatile waveforms all at once.
If one of the waveforms is currently being output, a "Not able to
delete the currently selected active arb waveform" error is generated.
DATA:DELete:ALL
Delete all user-defined arbitrary waveforms from memory. This command
deletes the waveform in volatile memory and all user-defined waveforms
in non-volatile memory. The five built-in waveforms in non-volatile
memory are not deleted.
• The colon before the ALL parameter is required (DATA:DELete:ALL).
If you insert a space instead of a colon, the function generator will
attempt to delete an arbitrary waveform with the name "ALL". If no
such waveform is stored in memory, a "Specified arb waveform does
not exist" error is generated.
• Use the DATA:DEL <arb name> command to delete stored waveforms
one at a time.
• You cannot delete the arbitrary waveform that is currently being
output. If you attempt to delete this waveform, a "Not able to delete
the currently selected active arb waveform" error is generated.
• You cannot delete any of the five built-in arbitrary waveforms. If you
attempt to delete one of these waveforms, a "Not able to delete a built-
in arb waveform" error is generated.
Chapter 4 Remote Interface Reference
Arbitrary Waveform Commands
4
207