Setting Sleep Mode Activation Time; Activating Sleep Mode Manually - Pitney Bowes dm60 series Operating Manual

6 • Machine Settings

Setting Sleep Mode Activation Time

You can set the amount of time the DM60 Series meter waits until
entering "sleep mode".
When the DM60 Series meter is in sleep mode, the display is blank
(except for the time in the lower right corner of the display) and you
can't process mail. You wake up the DM60 Series meter by pressing
any button on the control panel or by placing an item on the scale.
1. Press Menu/Options.
2. Use the Review ▲▼ keys to scroll to "Change Setup", then press
Enter/yes to confirm.
3. Use the Review ▲▼ keys to scroll to "Change sleep timeout?",
then press Enter/yes to confirm.
4. Key in the desired amount of time (in minutes, from 1 - 20) the
DM60 Series meter should be idle before the sleep mode activates,
then press Enter/yes to confirm. A message displays confirming
your choices.
5. Press Clear/Back repeatedly to return to the Home screen.

Activating Sleep Mode Manually

You can set put the DM60 Series meter into "sleep mode" at any time.
When the DM60 Series meter is in sleep mode, the display is blank
(except for the time in the lower right corner of the display) and you
can't process mail. You wake up the DM60 Series meter by pressing
any button on the control panel or by placing an item on the scale.
1. Press Lock.
2. At the prompt to set system to sleep mode, press Enter/yes. The
machine enters sleep mode.
NOTE: If you have enabled a lock code (see earlier topic), you will
be prompted to enter the lock code to wake up the meter.
6-6 SDC2029B