Using The Preset Feature; Turning The Preset Feature On Or Off - Pitney Bowes dm60 series Operating Manual

6 • Machine Settings

Using the Preset Feature

The preset feature allows you to save pre-defined values such as
postage, class, weight, Envelope Messaging, etc., within your DM60
Series that you can call up when necessary.
You don't have to program the values that go into the preset in
the traditional sense. Instead, the system takes a "snapshot" of the
current values on your machine when you define the preset. For
example, if the machine is set up to print Envelope Messaging, no
class is selected, and a postage amount is already on the screen,
these are the conditions that will be recorded by your DM60 Series
when you define the preset feature.
If you need to change the values of the preset, just change the
machine condition by entering the appropriate settings. The new
settings will be recorded when you run the "Storing a New Preset"
selection from the menu.
NOTES:
• If you have stored a preset, the DM60 Series reverts to the
preset values when it is first turned on or when it "wakes up"
after sleep mode
• When a postage rate change is announced, always check the
postage value assigned to the preset to make sure it complies
with the new rates.

Turning the Preset Feature On or Off

1. Press Menu/Options.
2. Use the Review ▲▼ keys to scroll to "Change Setup?", then press
Enter/yes to confirm.
3. Use the Review ▲▼ keys to scroll to "Use preset setup?", then
press Enter/yes to confirm.
Turning ON Preset - Press Enter/yes at "Turn preset ON?" prompt.
A message confirms your choice. You may view the preset values
if you wish, using the Review ▲▼ keys. When finished, press
Clear/Back repeatedly until you return to the Home screen.
6-2 SDC2029B