Figure 4. Maintenance End Points
Implementation Information
Because the S-Series has a single MAC address for all physical/LAG interfaces, only one MEP is allowed
per MA (per VLAN or per MD level).
Configuring the CFM
To configure the CFM, follow these steps:
1.
Configure the ecfmacl CAM region using the cam-acl command.
2.
Enable Ethernet
CFM.
3.
Create a Maintenance
4.
Create a Maintenance
5.
Create Maintenance
6.
Use CFM tools:
a.
Continuity Check
b.
Loopback Message and
c.
Linktrace Message and
Related Configuration Tasks
•
Enable CFM SNMP
Traps.
•
Display Ethernet CFM
98
Domain.
Association.
Points.
Messages.
Response.
Response.
Statistics.
802.1ag