Konica Minolta bizhub Pro C6500 User Manual page 352

Application Functions
Prerequisites
0 Use ADF. Use Separate Scan mode if original count exceeds 100 or if
original glass is desired for scanning the original. See page 9-21 for de-
tails.
0 Trays for copy paper, front/back covers, and insertions should have the
same paper size loaded. Auto Zoom is automatically selected.
0 Max. insert sheets: 30 locations, from 1~999, including front and back
covers
0 Post inserter is available as additional front/back cover tray source. In
this case, Post inserter will feed the first (front) cover and the last (back)
cover.
1
Position the original.
2
Load paper into the tray.
– Load regular sheets, insertion sheets and covers into any tray.
When using the Post inserter, load covers or insertion sheets into
the Post inserter tray.
Be sure that the trays for copy paper, front/back cover, and inser-
tions have the same paper size loaded.
– Check the tray information on the Machine Status Screen or Copy
Screen and use the specified paper; otherwise machine trouble
may occur.
– To use any other paper type/size than the specified paper, touch
[Paper Setting] on the Copy Screen to change the setting tempo-
rarily. page 9-39 for details.
3
Touch [Application] on the Copy Screen.
4
Touch [Insert Sheet] on the Application Screen.
bizhub PRO C6500
11
11-9