4
To load tabbed sheets in paper feeder unit trays (tray 4 and 5)
0 The tray paper type should be specified as tabbed sheets. See page 9-44
for the details of Paper Setting.
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
1
Withdraw the tray to be loaded with tabbed sheets.
2
Place tabbed sheets on the tray.
–
Place paper referring to the illustration shown above.
3
Move the side guide plates to the edge of the paper.
–
Set paper aligning it to the paper feed roller side of the tray.
–
Press the release lever of the front side guide plate to move the side
guide plates, and also move the rear edge guide to the edge of the
paper.
4
Push in the tray until it locks into place.
4-22
1st TAB
1st TAB
2nd TAB
3rd TAB
3 FINISHED SETS
Supplies & Handling
2nd TAB
3rd TAB
bizhub PRO C6500