Konica Minolta bizhub Pro C6500 User Manual page 427

11
5
Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Stamp/Image Overlay function with the current set-
ting remained, touch [Function Off].
6
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Stamp/Overlay] key
displayed under the [Application] key.
This key can also be used to display the Application Screen for making
setting change.
Auto Zoom and Auto Paper Select are released and ×1.0 magnification
is selected automatically.
The [Separate Scan] key on the Copy Screen also appears highlighted
to show that the Separate Scan mode is automatically selected.
7
Select any other copy conditions, as desired.
8
Press [Start] on the control panel.
The original image will be scanned into memory.
9
Position the original to be overlaid.
– Position the original either in the ADF or on the original glass.
10
Press [Start] to scan.
– Repeat steps 9 and 10 for all originals.
11
Touch [Separate Scan] to exit the Separate Scan mode.
12
Enter the desired print quantity from the control panel keypad, then
press [Start].
The machine will start printing when ready for output.
11-84
Application Functions
bizhub PRO C6500