Konica Minolta bizhub Pro C6500 User Manual page 142

Supplies & Handling
Reminder
Do not load above the limit level on the side guide plate.
Be sure that the side guide plates and rear edge guide are securely
aligned to the paper; otherwise the machine cannot detect the correct
paper size, or machine trouble may occur.
To load tabbed sheets in large capacity tray (tray 4)
0 The tray paper type should be specified as tabbed sheets. See page 9-44
for the details of Paper Setting.
1
Specify the paper type of tray 4 as tabbed sheets.
2
Open the tray top door.
3
Press the paper loading button to lower the tray bottom plate.
4
Move the tray paper guides and rear stopper to the edge of the paper.
– Set paper aligning it to the paper feed roller side of the tray.
– Move the side guide plates, and also move the rear stopper to the
edge of the paper. Refer to p. 4-17 for details.
5
Close the tray top door.
bizhub PRO C6500
Example: 3 Tabbed sheets loaded in position for one finished set.
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
1st TAB
1st TAB
2nd TAB
3rd TAB
1st TAB
2nd TAB
3rd TAB
3 FINISHED SETS
4
1st TAB
2nd TAB
3rd TAB
2nd TAB
3rd TAB
4-23