Konica Minolta bizhub Pro C6500 User Manual page 369

11
Prerequisites
0 Up to 30 locations can be specified for the original from 1 to 999 pages.
0 Separate Scan mode is automatically selected.
1
Load the original in the ADF.
– Be sure to arrange the original in page order, and then place it with
the first page faceup. Up to 100 original sheets can be set.
If the original count exceeds 100, divide them into blocks not ex-
ceeding 100 sheets, and load them from the block with the first
page.
2
Touch [Application] on the Copy Screen.
3
Touch [Insert Image] on the Application Screen.
4
Specify the image insertion location by entering page number.
– Use the control panel keypad to enter the page number. Touch [Set]
after each entry to move to the next key.
To clear an incorrect entry, touch [Delete].
Repeat this procedure to make all the page entry.
– Up to 30 image insertion locations can be specified. To enter the
16th to 30th locations, touch [,] to scroll to the next page.
11-26
Application Functions
bizhub PRO C6500