Konica Minolta bizhub Pro C6500 User Manual page 389

11
1
Position original on the original glass.
– When selecting Size Manual Input, place the original facedown on
the original glass so that the original image should fit within the area
measured by vertical/horizontal width from the rear-left corner.
Close the ADF/original cover gently.
– When selecting Size Auto Detect, open the ADF/original cover, then
place the original facedown on the original glass.
In this case, Non-Image Area Erase is automatically selected. Be
sure to keep the ADF/original cover open.
2
Touch [Application] on the Copy Screen.
3
Touch [Image Repeat] on the Application Screen.
4
Make setting for Size Manual Input or Size Auto Detect, as desired.
– To select Size Manual Input:
Touch [Manual] to highlight it, then use [+]/[,] to specify the de-
sired horizontal/vertical width.
11-46
Application Functions
bizhub PRO C6500