To Replace The Slider Control Knob - Valor 940 Installer And Owner Manual

Dream model.
The control slide unit is secured to the convection box
and not the fascia.
1. Remove the fascia (See section 17.4).
2. Detach the slide unit by removing two screws
securing the plastic slide mechanism to the convector
box.
3. Replace in the reverse order.

17.6 To replace the slider control knob.

Visage, Dream and Icon models.
1. Remove the fascia (See section 17.4).
2. Remove the control slide unit as in section 17.5.
3. Detach the control knob by removing two screws
(See figure 53).
4. Replace in the reverse order.
Adorn model
The slider control knob is not replaceable as a separate item, only as a complete
control slide unit.
©
GDC Group Ltd. 2011
INSTALLER GUIDE
Visage
Figure 52. Control slide fixings
Adorn
Figure 53. Control slide &
control knob fixings
Page 43
Icon