Table of Contents
Advertisement
Installation
Synchronize Remote Control
The receiver and the handset of the remote control sys-
tem must be initially synchronized before fi rst use.
1. Insert one 9 V
alkaline
2. Locate the Reset button on the top side of the re-
ceiver.
3. With a narrow object, press and hold the receiver's
reset button until you hear one short and one long
beeps. Release the reset button after the second
beep.
4. Within the subsequent 20 seconds, press the (small
fl ame button (
) on the remote handset until you
hear two short beeps confi rming the synchroniza-
tion is set.
This is a one time setting only and is not required when
changing the batteries in the remote battery holder.
The remote control system is now ready to use.
battery in the handset.
Remote Control Set-Up
55
Advertisement
Table of Contents
