Ceramic Fuel Effect Fitting; Maintenance; Battery Replacement - Valor 940 Installer And Owner Manual

CERAMIC FUEL EFFECT FITTING

The installer and owner guide for the ceramic fuel effect is separate from this guide.
The installer may have attached it to this guide or placed it inside. It is important that
the installer and owner guide for the ceramic fuel effect is followed correctly. If
replacing the ceramic fuel effect, where a new guide is supplied, follow the installer
and owner guide supplied with the replacement fuel effect.
Keep the replacement installer and owner guide with this owner guide for future
reference.

Battery replacement.

This appliance requires one 9V PP3 Ever Ready
Silver Seal (or equivalent) battery.
Adorn, Dream & Visage.
To replace the battery remove the bottom front
cover casting.
Icon
To replace the battery undo the screws at the
sides of the bottom front cover and remove the
cover (See figure 6).
Fit the new battery firmly to the connections on the
ignition block (See figure 7).
©
GDC Group Ltd. 2011
OWNER GUIDE

MAINTENANCE

Page 56
Figure 6. Icon bottom front cover
removal.
Figure 7. Battery fitting