Intelligent Flight Battery - dji MAVIC 2 ENTERPRISE Advanced User Manual

Make sure the motors are mounted securely and rotating smoothly. Land the aircraft immediately if a
motor is stuck and unable to rotate freely.
DO NOT attempt to modify the structure of the motors.
DO NOT touch or let hands or body parts come in contact with the motors after flight as they may be hot.
DO NOT block any of the ventilation holes on the motors or the body of the aircraft.
Make sure the ESCs sound normal when powered on.

Intelligent Flight Battery

The Mavic 2 Intelligent Flight Battery is a 15.4 V, 3850 mAh battery with smart charging and
discharging functionality. Only use a DJI approved AC power adapter to charge the battery.
Intelligent Flight Battery
Battery Features
1. Battery Level Display: the battery level LEDs display the current battery level.
2. Auto-Discharging Function: to prevent swelling, the battery automatically discharges to less than
60% of the maximum battery level when it is idle for more than 10 days. It takes approximately three
to four days to discharge the battery to 65%. It is normal to feel moderate heat being emitted from
the battery during the discharge process.
3. Balanced Charging: the voltages of the battery cells are automatically balanced during charging.
4. Overcharge Protection: the battery stops charging automatically once fully charged.
5. Temperature Detection: the battery only charges when the temperature is between 41° and 104° F (5°
and 40° C).
6. Overcurrent Protection: the battery stops charging if an excess current is detected.
7. Over-discharge Protection: discharging stops automatically to prevent over-discharge.
8. Short Circuit Protection: the power supply is automatically cut if a short circuit is detected.
9. Battery Cell Damage Protection: a warning prompt will appear in DJI Pilot when a damaged battery
cell is detected.
10. Hibernation Mode: the battery switches off after 20 minutes of inactivity to save power. If the
battery level is less than 10%, the battery enters Hibernation mode to prevent over-discharging. In
Hibernation mode, the battery level indicators do not illuminate. Charge the battery to wake it from
hibernation.
11. Communication: information about the voltage, capacity, and current of the battery is transmitted to
the aircraft.
12. Heating: the batteries of the Mavic 2 Enterprise Advanced are self-heating, enabling them to work in
harsh and cold weather conditions as low as -4° F (-20° C).
MAVIC 2 ENTERPRISE Advanced
AC Power Adapter
User Manual
©
2021 DJI All Rights Reserved.
25