System SP Tables-2
2812*
Drum Reverse Rotation (SSP)
Reverse time
001
Sets the reverse time of the drum motor after the end of a job.
Interval time
002
Sets the waiting time of the drum motor reverse after the end of a job.
2911*
Transfer Current On/Off Timing (SSP)
La (On Timing)
001
Adjust the timing to turn on the transfer current for the leading edge.
Lb (Switch Timing)
002
Adjust the timing to switch transfer current from the leading edge to the
image area.
Lc (Off Timing)
003
Adjust the timing to turn off the transfer current for the image area.
La (On Timing): Special 1
004
Adjust the timing to turn on the transfer current for the leading edge (Special
1).
Lb (Switch Timing): Special 1
005
Adjust the timing to switch transfer current from the leading edge to the
image area (Special 1).
D129/D130
[0 to 9 / 4 / 1 ]
[0 to 19 / 9 /1 ]
[-20 to 20 / 0 / 1 mm]
[0 to 30 / 10 / 1 mm]
[-20 to 20 / -5 / 1 mm]
[-20 to 20 / 0 / 1 mm]
[0 to 30 / 10 / 1 mm]
3-36
SM Appendix