Ricoh D129 Service Manual page 810

System SP Tables-8
L:FIN Jobs
These SPs total finishing methods for jobs output from within the document
8066
server mode screen at the operation panel. The finishing method is
specified from the print window within document server mode.
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external
8067
application, over the network. The finishing method is specified by the
application.
806x 1 Sort
806x 2 Stack
806x 3 Staple
806x 4 Booklet
806x 5 Z-Fold
806x 6 Punch
806x 7 Other
806x 8 Inside-Fold
806x 9 Three-IN-Fold
806x 10 Three-OUT-Fold
806x 11 Four-Fold
806x 12 KANNON-Fold
D129/D130
[0 to 9999999 / 0 / 1]
[0 to 9999999 / 0 / 1]
Number of jobs started in Sort mode. When a stored
copy job is set for Sort and then stored on the
document server, the L: counter increments. (See
SP8066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the
machine is in staple mode, the Staple counter also
increments.
Number of jobs started In any mode other than the
Booklet mode and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch
is set for a print job, the P: counter increments. (See
SP8064 6.)
Reserved. Not used
Number of jobs started In any mode other than the
Booklet mode and set for folding (Inside-fold).
Letter Fold-in Not Used
Letter Fold-out Not Used
Double Parallel Fold Not Used
Gate Fold Not Used
3-206 SM Appendix