Ricoh D129 Service Manual page 410


When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.

If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
Scan PGS/Mode
8231
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
001 Large Volume
002 SADF
003 Mixed Size
004 Custom Size
005 Platen
006 Mixed 1side/2side

If the scan mode is changed during the job, for example, if the user switches from ADF to
Platen mode, the count is done for the last selected mode.

The user cannot select mixed sizes or non-standard sizes with the fax application so if the
original's page sizes are mixed or non-standard, these are not counted.

If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is
enabled.

In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with
SADF, the Platen count is 1 and the SADF count is 3.
T:Scan PGS/Org
8241
These SPs count the total number of scanned pages by original type for all
jobs, regardless of which application was used.
8242 C:Scan PGS/Org
SM
[0 to 9999999 / 0 / 1]
Selectable. Large copy jobs that cannot be loaded in
the ADF at one time.
Selectable. Feeding pages one by one through the
ADF.
Selectable. Select "Mixed Sizes" on the operation
panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the original
directly on the platen.
Selectable. Select "Simplex/Duplex" on the operation
panel.
[0 to 9999999 / 0 / 1]
[0 to 9999999 / 0 / 1]
5-151
Main SP Tables-8
D129/D130