Ricoh D129 Service Manual page 555

Service Call Conditions
925 B Net File function error
-00 - HDD is defective
-01 - NetFile management file is broken
The NetFile file management on the HDD cannot be used, or a NetFile
management file is corrupted and operation cannot continue. The HDDs are
defective and they cannot be debugged or partitioned, so the Scan Router
functions (delivery of received faxes, document capture, etc.), Web
- -
services, and other network functions cannot be used.
HDD status codes are displayed below the SC code.

Refer to the four procedures below (Recovery from SC 925).
Here is a list of HDD status codes:
Display
(-1) HDD not connected
(-2) HDD not ready
(-3) No label
(-4) Partition type incorrect
(-5) Error returned during label read or check
(-6) Error returned during label read or check
(-7) "filesystem" repair failed
(-8) "filesystem" mount failed
(-9) Drive does not answer command
(-10) Internal kernel error
(-11) Size of drive is too small
(-12) Specified partition does not exist
D129/D130
Meaning
6-66 SM