Ricoh D129 Service Manual page 715

RCG Read Timeout
010
Specifies the read timeout interval when calling the RCG.
[0 to 100 / 60 / 1 second /step]
Port 80 Enable
Enables/disables access via port 80 to the SOAP method.
011
[0 or 1 / 0 / – ]
0: Disabled, 1: Enabled
@Remote Communication Permission
[0 to 2 / 1 / 1 ]
012
0: Not permitted
1: Permitted
2: Partially limit
RFU (Remote Firmware Update) Timing
Selects the RFU timing.
013
[0 or 1 / 1 / – ]
0: RFU is executed whenever update request is received.
1: RFU is executed only when the machine is in the sleep mode.
RCG Error Cause
[0 or 1 / 0 / – ]
014
0: Normal
1: Fails to reflect the client/server certificate settings by network failure to
reboot. Transition to 0 on restart the machine.
SM Appendix 3-111
System SP Tables-5
D129/D130