Laser Unit
3.
Upper inner cover [B] (
4.
Glass cap [C]
5.
Shield glass [D]
6.
Lower inner cover [E] (
7.
Laser unit connectors [E] (
Do not disconnect the harnesses on the LD board [F] unless the LD unit has to be
replaced. This board is precisely adjusted in the factory.
8.
Laser unit [G] (
When sliding out the laser unit, do not hold the LD board. Hold the laser unit.
D129/D130
x 2)
x 2)
x 3,
x 1)
x 2)
4-32
SM