Ricoh D129 Service Manual page 748

System SP Tables-5
041 Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it onto the new HDD. However,
the new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD
automatically. However, at this point the address book can be accessed
by only the system administrator or key operator.
5. Enter the SP mode and do SP5846 041. After this SP executes
successfully, any user can access the address book.
Addr Book Media
Displays the slot number where an address book data is in.
[0 to 30 / - /1]
043
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
4: USB Flash ROM
Initialize All Setting & Addr Book
046
Initializes all settings and the address book.
Initialize Local Address Book
047
Clears all of the address information from the local address book of a
machine managed with UCS.
D129/D130
20: HDD
30: Nothing
3-144 SM Appendix