Ricoh D129 Service Manual page 345

Main SP Tables-5
Delivery Server Model
Lets you change the model of the delivery server that is registered by the I/O
device.
[0 to 4 / 0 / 1 step]
009
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Delivery Svr. Capability
Changes the functions that the registered I/O device can do.
[0 to 255 / 0 / 1 step]
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
010
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
Delivery Svr.Capability (Ext)
These settings are for future use. They will let you increase the number of
011
registered devices (in addition to those registered for SP5845 010).
There are eight bits (Bit 0 to Bit 7). All are unused at this time.
013 Server Scheme (Primary)
014 Server port Number (Primary)
015 Server URL Path (Primary)
016 Server Scheme (Secondary)
017 Server Port Number(Secondary)
018 Server URL Path (Secondary)
D129/D130
[1 to 65535 / 80 / 1]
[1 to 65535 / 80 / 1]
5-86 SM