Ricoh D129 Service Manual page 743

100 Notify Unsupport
This SP determines whether an alert message appears on the control panel
when a USB device (unsupported device) that cannot use an A-connector is
connected.
[0 to 1 / 1 / 1]
0: Function enable
1: Function disable

An unsupported device is a device that cannot use the functions of the
USB device. For example, a USB mouse cannot be used even if it
connected.

If the PictBridge option is not mounted, even if a digital camera is
connected it cannot be used because it is an unsupported device.
Delivery Server Setting
5845*
These are delivery server settings.
FTP Port No.
001
[0 to 65535 / 3670 / 1]
IP Address (Primary)
Use this SP to set the Scan Router Server address. The IP address under
002
the transfer tab can be used with the initial system setting.
[Range: 000.000.000.000 to 255.255.255.255]
Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a
006
test error occurs during document transfer with the NetFile application and
an external device.
[0 to 999 / 300 / 1 sec]
IP Address (Secondary)
Sets the IP address that is given to the computer that is the secondary
008
delivery server for Scan Router. This SP lets you set only the IP address,
and does not refer to the DNS setting.
[Range: 000.000.000.000 to 255.255.255.255]
SM Appendix 3-139
System SP Tables-5
D129/D130