Ricoh D129 Service Manual page 267

Main SP Tables-1
023 Feed Waiting: Plain
024 Feed Waiting: M-Thick
025 Feed Waiting: Thick 1
026 Feed Waiting: Thick 2
027 Feed Waiting: Thin
028 Feed Wait: Center Minus: Plain
029 Feed Wait: Ends Minus: Plain
030 Feed Wait: Center Minus: M-Thick
031 Feed Wait: Ends Minus: M-Thick
032 Feed Wait: Center Minus: Thick 1
033 Feed Wait: Ends Minus: Thick 1
034 Feed Wait: Center Minus: Thick 2
035 Feed Wait: Ends Minus: Thick 2
036 Feed Wait: Center Minus: Thin
037 Feed Wait: Ends Minus: Thin
038 Feed Waiting: Maximum Time
D129/D130
Turns the feed waiting mode on or off for
each paper type.
[0 to 1 / 0 / 1]
0=Off, 1=On
The paper waits at the registration roller
until the fusing temperature reaches the
prescribed temperature (adjustable with
SP1105-028 to -37).
If you enable this feature, also set SP
1105-38 to a convenient value for the
customer.
Adjusts the offset value for each re-load
temperature to exit the feed waiting
mode.
[0 to 60 / 0 / 1 deg]
Sets the maximum feed waiting time.
[0 to 30 / 0 / 1 sec]
The paper is fed when the time specified
with this SP has passed even though the
fusing temperature has not reached the
prescribed temperature.
0: Disabled.
5-8 SM