Cannot Send By Alias Fax Number - Ricoh D129 Service Manual

Cannot send by Alias Fax number.

Check Point
1 LAN cable connected?
2 Number of specified Alias fax correct?
3 Firewall/NAT installed?
4 Transmission sent manually?
5 Gatekeeper/SIP server installed correctly? Contact the network administrator.
Gatekeeper/SIP server power switched
6
on?
IP address/host name of Gatekeeper/SIP
7
server correct?
DNS server registered when
8 Gatekeeper/SIP server host name
specified?
9 Enable H.323/Enable SIP SW is set to on?
10 IP address of local fax registered?
11 Alias number of local fax registered?
12 Remote fax registered in Gatekeeper?
13 Remote fax a T.38 terminal?
14 Remote fax switched off or busy?
SM
Action
Check the LAN cable connection.
Confirm the Alias of the remote fax.
Error Code: 13-14
Cannot breach the firewall. Send by
using another method (Fax, Internet
Fax)
Manual sending not supported.
Contact the network administrator.
Check the IP address/host name.
Contact the network administrator.
Check the settings.
See User Parameter SW 34 Bit 0/SW
34 Bit 1
Register the IP address of the local fax.
Register the Alias number of the local
fax.
Contact the network administrator.
Check whether the remote fax is a T38
terminal.
Contact the network administrator.
47
IP-Fax Troubleshooting
D629