ATSG Chrysler 45RFE Service Manual page 87

33. Install the number six thrust bearing assembly
onto the bottom of 2-4 clutch retainer in the
direction shown in Figure 118, and retain with
a small amount of TransJel®.
34. Install the 2-4 clutch retainer into the case as
shown in Figure 118.
35. Install the 2-4 clutch retainer tapered snap ring
in case with taper facing up (See Figure 118).
Ensure snap ring openings face valve body.
Continued on Page 88.
1
3
4
1. SECOND CLUTCH STEEL PLATES (2 REQUIRED).
2. SECOND CLUTCH FRICTION PLATES (2 REQUIRED).
3. SECOND CLUTCH BACKING PLATE.
Figure 117
AKPPHELP.RU Руководство по ремонту АКПП
Technical Service Information
2
AUTOMATIC TRANSMISSION SERVICE GROUP
1
2
3
4
5
1. 2-4 CLUTCH RETAINER TAPERED SNAP RING (GOES IN CASE).
2. 2-4 CLUTCH RETAINER.
3. NUMBER 6 THRUST BEARING.
4. 2-4 CLUTCH RETAINER FLAT SNAP RING (GOES IN CASE).
Figure 118
Copyright © 1999 ATSG
87