ATSG Chrysler 45RFE Service Manual page 70

2
1
1. STATOR SHAFT ASSEMBLY.
2. STATOR SHAFT ASSEMBLY RETAINING BOLTS (5 REQUIRED).
70
AKPPHELP.RU Руководство по ремонту АКПП
Technical Service Information
2
Copyright © 1999 ATSG
Figure 95
AUTOMATIC TRANSMISSION SERVICE GROUP
OIL PUMP AND COVER ASSEMBLY (Cont'd)
18. Install the stator shaft support into the oil pump
assembly as shown in Figure 95.
19. Install the 5 bolts that hold the stator support to
the oil pump assembly as shown in Figure 95.
20. Torque the 5 stator shaft support bolts down to
12 Nm (105 in lbs).
21. Install five new sealing rings on stator support
in their respective grooves and ensure that they
are properly hooked. Refer to Figure 96.
22. Set the completed oil pump assembly aside for
the final assembly process (See Figure 97).